Speedway 94031064 Cast Iron Lightweight Scalloped Brake Rotor - 11.75" x 1.25"

Description

7" 8 hole bolt circle, Thru thread
Cast Iron Scalloped Brake Rotor - 11.75 x 1.25 Inch
Sku # 94031064
Mfr. Part # 94031064
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
Proper Break-In Procedure for Steel or Cast Iron Rotors
New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.
Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage.
Info
Speedways premium 32 Vane scalloped cast iron brake rotors weigh only 6.36 lbs.
Item Details
1.25 x 11.75
8 x 7" B.C.
Specs
Vented iron
Inboard mounted (Sprints)
Thickness: 1.25"
O.D.: 11.75"
Bolt Circle: 8 x 7"
Threads:  Thru
Weight: 6.36 lbs
Face: scalloped
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Sold in Quantity
Each
Rotor Diameter
11.75 Inch
Rotor Hat Bolt Pattern
8 x 7.00"
Rotor Shape
Scalloped
Rotor Style
Plain Face
Rotor Finish
Natural
Rotor Thickness
1.25
Weight
6.36
Position
Rear
Rotor Type
Vented
Rotor Material Type
Cast Iron
MFG. Part #
94031064
Reviews
I WOULD BUY THIS PRODUCT AGAIN AND AGAIN
Rated
by TOPPERGUY on September 03, 2019
Summary:
iT'S A BRAKE ROTOR, IT STOPPED MY RACE CAR BUT NOT IN TIME, THE RACECAR AHEAD OF ME BROKE HIS THROTTLE CABLE ON THE START OF THE RACE, PUT HIM IN THE INFIELD WHETHER HE WANTED TO OR NOT. 2 HOURS OF BODYWORK ON FENDER AND BUMPER AND RACED THE NEXT WEEK.
Yes, I recommend this product.
Been using these for years on dirt late, great rotor
Rated
by Jim4x on March 20, 2019
Summary:
On dirt late model,good wear, no warping
Yes, I recommend this product.
Well worth the money!
Rated
by MWC on October 16, 2018
Summary:
Improved my stopping distance greatly. Dissipates heat quickly
Yes, I recommend this product.
best part for the money
Rated
by ohsomthin on September 14, 2014
Summary:
Nice part , shipped fast, fits like a glove .. will buy more of these . Phone personel were very helpful too
Yes, I recommend this product.
Related Items / Suggested Parts
Wilwood 160-8136 Ultralite 32 Vane Vented Scalloped Iron Rotor, 12.19
Wilwood 160-8343 Ultralite 32 Vane Vented Scalloped Rotor, 11.75 Inch
Cast Iron Drilled Scalloped Brake Rotor - 11.75 x 1.25
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.